sponger_2
10-29-2005, 01:23 AM
its a 30 gallon tank. 2 buckets filled with bio balls, i cut the bucket as you can see in the pic and siliconed plexiglass to it. i drilled a bunch of holes in the plexi. i drilled a big hole on the bottom of the bucket as well as some small holes. it hold 3-4 inches of filter pads above the plexiglass, no probs draining. i run 2 of these buckets and water returns via a lifetech 10000 pond pump. i think its 2600gph. cost like $60.00. with this setup my tank drains via dual 1" bulkheads and returns through 3/4" inch pvc. not sure how to measure how much its turning over but i figure its enough. so let me know what you guys think.
http://www.cichlidforums.com/postimages/2005-10-29/117633-001.jpg (http://img498.imageshack.us/my.php?image=picoflid5hl.jpg)
http://www.cichlidforums.com/postimages/2005-10-29/117633-002.jpg (http://img489.imageshack.us/my.php?image=sumppic14iu.jpg)
http://www.cichlidforums.com/postimages/2005-10-29/117633-001.jpg (http://img498.imageshack.us/my.php?image=picoflid5hl.jpg)
http://www.cichlidforums.com/postimages/2005-10-29/117633-002.jpg (http://img489.imageshack.us/my.php?image=sumppic14iu.jpg)