PDA

View Full Version : Filtration type



chennes
09-21-2002, 11:01 PM
If, [i:cc10a729c6]hypothetically[/i:cc10a729c6] mind you, I were interested in setting up a 125g tank, how should I go about filtering it? My options seem to be 2 over-the-back ACs or a canister filter, or perhaps something more along the DIY fluidized bed filter sorta thing. Any recommendations?

Chris

SGypsyMermaid
09-21-2002, 11:03 PM
i'd go with the two ac's [i:4fd880bdfd]and[/i:4fd880bdfd] the canister.

jonah
09-22-2002, 08:35 AM
I've got 2 AC500's and a Fluval404 on my 125g. The AC's have 2 sponges in each. My other 125g has 2 emperor400's and a penguin300, but it's in the garage so I don't care about the noise.

chc
03-02-2003, 02:58 PM
Ideally, you'd have an efficient wet/dry or biowheel filtration as a start. Couple that with a strong mechanical filtration system and you're there!

As far as specific recommendations go, I'd suggest at least two Emperor 400's. Perhaps add another Emperor (I think you'd still have room for a 280), and that would take care of your mechanical (and chemical if you filled the media trays). Then, if the tank was drilled (a strong suggestion), I'd attach a wet dry under the tank. An alternative to that would be various sponge filters (maybe two or three Hydro Sponge IV's or V's). Perhaps you could also fashion a powerhead arrangement to keep a good flow throughout the tank.

All in all, the overflow and power filter combination is the most effective (if not cheapest) combination).